top of page
  • 32channel input

  • Third-party IP cameras supported with ONVIF conformance

  • Support 2-ch HDMI, 1-ch VGA, HDMI2 at up to 4K(3840x2160) resolution

  • Up to 8 Megapixels resolution recording

  • Support H.265/H.264 video formats

  • Accurate retrieval, instant playback

  • 4 SATA HDD up to 24TB

  • Support for 12V Power output

  • Plug & Play with up to 16 independent PoE network interfaces

  • Support for P2P, UPnP, NTP, DHCP, PPPoE

  • Support for mobile client access

16ch 4-SATA PoE NVR




SATA 3.0 

Up to 6Gb/s to ensure fluent preview and playback, high reliability on video recording.

Higher data download speed than USB2.0, 1 hour video backup takes only 5 minutes compare to 1 hour by USB2.0.

USB 3.0

802.3at Standard, up to 25.5W for each port.


Just plug-in the IP camera and watch the video instantly.

Plug & Play

Incon NVR201 and NVR202, with or without PoE, all with fanless design. No noise made any more.


Support corridor mode IP camera, 3/5/7 split display mode available

Corridor mode

Move the hard disk from one NVR to another, playback the video from the hard disk directly.

Hard disk roaming

Storage with block data, no disk fragmentation, no pre-formatting needed, much higher efficiency and easier to use.

Non pre-formatting HDD

Smartly help you to find the video clip you want from the numerous video recordings quickly.

Smart search

Don’t need to upgrade the firmware of IP camera on your PC, just do it on your NVR

IPC upgrade on NVR


Linux based, password modification prompt and password strength evaluation, https transmission, telnet default disabled, to protect your NVR from hacker 360°.

Higher anti-hacker protection





Rear Panel




Download Site


bottom of page