4 Channel input
Third-party IP cameras supported with ONVIF conformance
HDMI and VGA output up to 1080P
Up to 4 Megapixels resolution recording
Accurate retrieval, instant playback
1 SATA HDD up to 6TB
Plug & Play with 4 independent PoE network interfaces
Support for P2P, UPnP, NTP, DHCP, PPPoE
Support for mobile client access
Network Video Recorder
Just plug-in the IP camera and watch the video instantly.
Plug & Play
Incon NVR201 and NVR202, with or without PoE, all with fanless design. No noise made any more.
802.3at Standard, up to 25.5W for each port.
Up to 6Gb/s to ensure fluent preview and playback, high reliability on video recording.
Storage with block data, no disk fragmentation, no pre-formatting needed, much higher efficiency and easier to use.
Non pre-formatting HDD
Move the hard disk from one NVR to another, playback the video from the hard disk directly.
Hard disk roaming
Don’t need to upgrade the firmware of IP camera on your PC, just do it on your NVR
IPC upgrade on NVR
Smartly help you to find the video clip you want from the numerous video recordings quickly.
Support corridor mode IP camera, 3/5/7 split display mode available
Higher data download speed than USB2.0, 1 hour video backup takes only 5 minutes compare to 1 hour by USB2.0.
Linux based, password modification prompt and password strength evaluation, https transmission, telnet default disabled, to protect your NVR from hacker 360°.
Higher anti-hacker protection